Below is a VHDL program for a 1:8 Demux using Data Flow Modeling:
<pre>
“`vhdl
— 1:8 Demux using Data Flow Modeling
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
entity Demux1to8 is
Port (
Sel : in STD_LOGIC_VECTOR(2 downto 0); — 3-bit input for select lines
Input : in STD_LOGIC; — Input signal
Y : out STD_LOGIC_VECTOR(7 downto 0) — 8 outputs
);
end entity Demux1to8;
architecture dataflow of Demux1to8 is
begin
process (Sel, Input)
begin
case Sel is
when “000” =>
Y <= (Input, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’);
when “001” =>
Y <= (‘0’, Input, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’);
when “010” =>
Y <= (‘0’, ‘0’, Input, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’);
when “011” =>
Y <= (‘0’, ‘0’, ‘0’, Input, ‘0’, ‘0’, ‘0’, ‘0’);
when “100” =>
Y <= (‘0’, ‘0’, ‘0’, ‘0’, Input, ‘0’, ‘0’, ‘0’);
when “101” =>
Y <= (‘0’, ‘0’, ‘0’, ‘0’, ‘0’, Input, ‘0’, ‘0’);
when “110” =>
Y <= (‘0’, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’, Input, ‘0’);
when others =>
Y <= (‘0’, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’, ‘0’, Input);
end case;
end process;
end architecture dataflow;
“`
</pre>
In this code, we define an entity Demux1to8 with three inputs: Sel for the select lines (3 bits), Input for the input signal, and eight outputs Y representing the demultiplexer outputs. We use the case statement to demultiplex the input signal based on the select lines. The selected output is driven high with the input value, while all other outputs are driven low.